BRUSH RAKE

The AIM Vineyard Brush Rake is the ideal tool for removing punning, leaves and grape mummies from the vine row. The removal of the aforementioned will aid in spraying and cultural vineyard practices in the future.

Brushes are made of a combination of polypropylene and steel bristles. The poly bristles on the outer perimeter provide excellent wear while the inner steel bristles provide the aggressive action to remove small weeds. For more aggressive action, all-steel brush assembly is also available.

Hydraulic motors power the brushes. Hydraulic cylinders can be used to raise and lower the brush's while built-in angle plates provide for a wide range of brush adjustments angles. A standard brush rake arm assembly mounts on a standard 2 1/4" tool bar.

The head drive assembly of the brush rake unit has a double set of bearings and a torque arm drive for the hydraulic motor; this allows the load to be distributed to the bearings and not impact the hydraulic motor and shaft seal.

A right side brush turns clockwise and a left side brush turns counter-clockwise which makes the brush's walk outward and self power around the stakes and vines.    

Vineyard Berm or Brush Rake

Three Point Mount with Gauge Wheels


Vineyard Brush Rake

Front  or side mounts available

or

Mount on your own A- frame and tool bar